2012/12/17 に公開
For this project let's build a sexy looking generator that uses electricity to convert water into an extremely powerful fuel! Here's how to build an OxyHydrogen generator from scratch.
http://www.thekingofrandom.com
I've been getting a lot of requests for build plans, so I made a 23 page .pdf file you can have for $20 (This helps compensate for the 3 days it took men to make them).
Email me at grant@thekingofrandom.com and tell me you're interested.
Everything you need to know should be in the video, but the plans have templates for the stainless steel plates, a parts list with SKU numbers, pictures, instructions, and expanded view diagrams of the systems, including an alternate "all ABS" option.
Music by Kevin Macleod (Breakdown)
http://incompetech.com/
Project inspired by "Smack's Booster": http://www.free-energy-info.co.uk/Sma...
WARNING: This project should not be attempted without adult supervision and adequate training. Misuse, or careless use, of tools or projects may result in serious injury, property damage, and/or death. Use of this video content is at your own risk.
NOTE:
This is not a "free energy" device, "over unity" device, or a claim to be the solution to the worlds energy crisis. This is a project I did to experiment with the electrolysis of water, and the resulting gasses collected.
I have not tried this HHO fuel to operate engines, although many people claim they have done it with success.
ABOUT:
The generator requires electricity to electrolyze H2O (water) into gas. The resulting mixed gas is H2 and O2. I typically hook this up to my car battery while the vehicle is running, so the alternator takes most of the load. On 12 volts I get about 1.5 liters/minute, but when I want to make the gas faster, I hook 2 car batteries in series for 24 volts, and this exponentially increases the gas production to over 5 liters per minute.
Current draw seems to be around 20-50 amps depending on whether you use 12-24 volts. High current draws mean the electrolyte heats up, and if left too long the plastic can warp or melt causing structural failure.
Some people ask why the plates aren't all electrically connected. The plates that aren't connected are called "floater" plates, or "neutral" plates. There is too much information to post about them here, so do a google search, or check out websites like http://www.hho4free.com/neutral_plate... for an in depth explanation of the theory.
I used KOH as my electrolyte because research suggested it was the best. I haven't experimented with other electrolytes, but have heard that salt, sodium hydroxide, vinegar, etc could work, but will dirty and may corrode the plates. Potassium Hydroxide keeps the system clean, however, it is caustic, so be careful if you choose to use it. You can probably get away with about 2-4 teaspoons of KOH per 6 liters of water.
This system produces an extremely powerful OxyHydrogen gas. When the gas is used, it simply turns back into water, and that's good for the environment. However I believe it takes more electric energy to produce the gas than is obtained from the gas. This device merely converts the energy from one form to another, with given losses.
As long as you have enough electricity, the amount of water already in this system is enough to produce thousands and thousands of liters of fuel. Some people say this is the fuel of the future. Either way, it's a very powerful gas!
If you need more information, or want to purchase build plans for this design, send an email request to grant@thekingofrandom.com.
http://www.thekingofrandom.com
I've been getting a lot of requests for build plans, so I made a 23 page .pdf file you can have for $20 (This helps compensate for the 3 days it took men to make them).
Email me at grant@thekingofrandom.com and tell me you're interested.
Everything you need to know should be in the video, but the plans have templates for the stainless steel plates, a parts list with SKU numbers, pictures, instructions, and expanded view diagrams of the systems, including an alternate "all ABS" option.
Music by Kevin Macleod (Breakdown)
http://incompetech.com/
Project inspired by "Smack's Booster": http://www.free-energy-info.co.uk/Sma...
WARNING: This project should not be attempted without adult supervision and adequate training. Misuse, or careless use, of tools or projects may result in serious injury, property damage, and/or death. Use of this video content is at your own risk.
NOTE:
This is not a "free energy" device, "over unity" device, or a claim to be the solution to the worlds energy crisis. This is a project I did to experiment with the electrolysis of water, and the resulting gasses collected.
I have not tried this HHO fuel to operate engines, although many people claim they have done it with success.
ABOUT:
The generator requires electricity to electrolyze H2O (water) into gas. The resulting mixed gas is H2 and O2. I typically hook this up to my car battery while the vehicle is running, so the alternator takes most of the load. On 12 volts I get about 1.5 liters/minute, but when I want to make the gas faster, I hook 2 car batteries in series for 24 volts, and this exponentially increases the gas production to over 5 liters per minute.
Current draw seems to be around 20-50 amps depending on whether you use 12-24 volts. High current draws mean the electrolyte heats up, and if left too long the plastic can warp or melt causing structural failure.
Some people ask why the plates aren't all electrically connected. The plates that aren't connected are called "floater" plates, or "neutral" plates. There is too much information to post about them here, so do a google search, or check out websites like http://www.hho4free.com/neutral_plate... for an in depth explanation of the theory.
I used KOH as my electrolyte because research suggested it was the best. I haven't experimented with other electrolytes, but have heard that salt, sodium hydroxide, vinegar, etc could work, but will dirty and may corrode the plates. Potassium Hydroxide keeps the system clean, however, it is caustic, so be careful if you choose to use it. You can probably get away with about 2-4 teaspoons of KOH per 6 liters of water.
This system produces an extremely powerful OxyHydrogen gas. When the gas is used, it simply turns back into water, and that's good for the environment. However I believe it takes more electric energy to produce the gas than is obtained from the gas. This device merely converts the energy from one form to another, with given losses.
As long as you have enough electricity, the amount of water already in this system is enough to produce thousands and thousands of liters of fuel. Some people say this is the fuel of the future. Either way, it's a very powerful gas!
If you need more information, or want to purchase build plans for this design, send an email request to grant@thekingofrandom.com.
0 件のコメント:
コメントを投稿